Filter
Top Products
10
To fit these brackets remove the two screws at the top left and right
hand front corners of the cabinet.
Position the two brackets as shown in the figure and replace the two
securing screws.
☞
☞
Push the appliance into
place. The plug socket nec-
essary for connection of
the appliance to the elec-
tricity supply should be
positioned, so that the plug
is not placed in the recess.
To adjust the height pro-
ceed as follows:
Loosen or tighten the two
front feet.
☞
☞
596
555
max
Li89
+
-
2
The rear feet are adjusted by turning the screw in the front kick plate
to the left or right.
☞
Two cabinet securing brackets
are supplied with the installa-
tion pack. They need to be
assembled onto the cabinet
prior to cabinet being pushed
into the Kitchen aperture.
☞
Left hand
bracket
Right hand
bracket
1/a
II52
If necessary, pads are supplied for the
rear feet to make sliding the appliance
in and out of the recess easier. To fit the
pads, press them onto the rear feet.
If required, the dimensions of these
pads can be reduced by breaking them
where marked.
☞
2/a