Filter
Top Products
13
2. Touch the “double ring” sensor panel.
This will switch the setting to the outer heating ring. The control light
will illuminate.
3. To switch off the outer heating ring, touch the “double ring” sensor
panel, and the outer heating ring will switch off.
STOP+GO function
When the “Stop+Go” sensor panel is actuated all cooking zones that
are switched on are simultaneously switched to the keep warm setting.
The control light for the “Stop+Go” sensor panel will illuminate. The
keep warm setting will be indicated in the display with u.
When the “Stop+Go” sensor panel is actuated again, the cooking set-
tings that were previously selected are reset and the control light goes
out.
3 The timer is not stopped by the Stop+Go function.
If an automatic warm up function was selected in the heating up
stage a this will be stopped by the Stop+Go function, and the previ-
ously selected cooking setting will be reset by actuating the “Stop+Go”
sensor panel again.