Filter
Top Products
Electrolux Blast Chillers
Blast Chillers - 56 kg
Internet: http://www.electrolux.com/foodservice
HDAA0302009-10-06Subject to change without notice
TROLLEY FOR 20X1/1 ROLL-IN RACK 922132
RILSAN COATED GRID 881061
REMOVABLE TRAY SUPPORT RACK FOR 20 GN1/1 881010
RACK RAILS FOR VERTICAL BLAST CHILLER 881182
PRINTER FOR HACCP BASIC VERSION 881532
PLASTIC COATED GRID-600X400 MM 880864
PAIR OF 1/1 GN AISI 304 S/S GRIDS 921101
KIT HACCP EKIS 922166
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW 880183
KIT 3 SINGLE SENSOR PROBES FOR BC/BCF 880269
80MM PITCH ROLL-IN RACK 14X1/1GN 922205
60-MM PITCH ROLL-IN RACK FOR 20X1/1 922203
3-SENSOR PROBE FOR CHILLER+C/FREEZER 880088
ACCESSORIES
REMOVABLE TRAY SUPPORT RACK FOR 20 GN1/1 4
1 SINGLE SENSOR PROBE CHILLER+C/FREEZER 1
INCLUDED ACCESSORIES
Net weight - kg. 231
installed-electric 2.558
Power - kW
at evaporation temperature - °C -5
Refrigerant power
Refrigeration power - W 5363
Refrigerant quantity - g. 4000
Refrigerant type R404a
Compressor power - HP 2.5
Max load capacity - trays h 65 mm - n° 12
Trays type GN 1/1; 600x400
Door hinges Right Side
N° and type of door 1
height 2230
depth/with open doors 835, 1570
width 800
External dimensions - mm
Cooling unit Built-In
Gross capacity (D.I.N. 8952) - l. 560
UK Guide lines - chilling / freezing 56
NF Regulations - chilling / freezing 43.2
Productivity per cycle - kg.
Type D - 56 KG CHILLER
TECHNICAL DATA
RBC201
726624
CONSTRUCTION
• Internal and external finishing in 304
AISI stainless steel and backpanel in
galvanized steel.
• High density polyurethane
insulation, 60 mm tickness, HCFC
free.
• Environmentally friendly: R404a as
refrigerant fluid.
• Developed and produced in ISO
9001 and ISO 14001 certified factory.
• Inner cell with fully rounded corners.
• Door equipped with removable
magnetic gasket with hygienic design.
• Motors and fan waterproof
protected IP20.
• Evaporator with antirust protection.
• Ventilator (fan) swinging hinged
panel for access to the evaporator for
cleaning.
• Automatic heated door frame.
• Thermostatic expansion valve to
optimize the cooling unit efficiency.
• Adjustable feet 150 mm high.
• Stand alone printer as accessory.
• PC connection on request, gate RS
485.
INSTALLATION
• No water connections required.
• Waste water can be plumbed into
drain, but can also be collected in an
optional waste container.
*NF HYGIENE ALIMENTAIRE
certifying authority : AFAQ AFNOR
CERTIFICATION. Adress:11, Avenue
Francis de Pressense - 93571
Saint-Denis La Plaine Cedex - France.
Conformity with regulation NF031.
Certified guarantees: fitness for
cleaning, thermal performance.