Electrolux air-o-chill
Blast Chiller/Freezers 180kg 20GN1/1
Internet: http://www.electrolux.com/foodservice
HDBB0602009-10-06Subject to change without notice
TROLLEY TRAY RACK F.16X1/1GN,80MM PITCH 922010
TROLLEY TRAY RACK F. 20X1/1GN,63MM PITCH 922007
THERMAL COVER FOR 20X1/1GN 922014
PRINTER FOR HACCP BASIC VERSION 881532
PASTRY TROLLEY 16(400X600)80MM-20 1/1 LW 922068
KIT HACCP EKIS 922166
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW 880183
KIT 3 SINGLE SENSOR PROBES FOR BC/BCF 880269
BANQ.TROLLEY-54PLATES-74MM PITCH-20GN1/1 922016
BANQ.TROLLEY-45PLATES-85MM PITCH-20GN1/1 922072
AIR REMOTE UNIT BC+BCF 180KG 2X20 GN1/1 881015
2 SINGLE SENSOR PROBES CHILLER+C/FREEZER 880096
1 SINGLE SENSOR PROBE CHILLER+C/FREEZER 880089
ACCESSORIES
3-SENSOR PROBE FOR CHILLER+C/FREEZER 1
INCLUDED ACCESSORIES
Net weight - kg. 468
installed-electric 3.28
Power - kW
at evaporation temperature - °C -30
Refrigerant power
Refrigeration power - W 10910
Refrigerant type R404a
Trays type GN 1/1; GN 2/1
Door hinges Right Side
height 2234
depth/with open doors 1264, 2371
width 1800
External dimensions - mm
Thermometers Digital
Thermostat Electronic
Cooling unit Remote
Gross capacity (D.I.N. 8952) - l. 2841
UK Guide lines - chilling / freezing 180, 170
Productivity per cycle - kg.
Type J - FREEZERS - 180 KG - GN
2/1
TECHNICAL DATA
AOFP401CRD
726865
CONSTRUCTION
• Automatic heated door frame.
• Internal and external finishing in
stainless steel 304 type.
• High density polyurethane
insulation, 60 mm tickness, CFC, HFC
and HCFC free (Cyclopenthane).
• Environmentally friendly: R404a as
refrigerant fluid.
• Developed and produced in ISO
9001 and ISO 14001 certified factory.
• Inner cell with fully rounded corners.
• Door equipped with removable
magnetic gasket with hygienic design.
• All motors and fan waterproof
protected.
• Evaporator with anti-rust protection.
• Ventilator (fan) swinging hinged
panel for access to the evaporator for
cleaning.
• Solenoid valves.
• Stand alone printer as optional, built
in on request.
• PC connection on request, gate RS
485.
INSTALLATION
• No water connections required.
• Waste can be plumbed into drain,
but can also be collected in optional
waste container.
Installation diagram:
C - Water drain
I - Electrical connection
Y - Connection for appliance lifting
L - Remote electrical connection
N - Cooling water inlet
O - Cooling water outlet