Filter
Top Products
10
Starting Up - Setting the Temperature
1. Plug the mains plug into the mains socket.
2. If the display is OFF, press ON/OFF button. The alarm light flashes and the
buzzer sounds.
3. Press the “I” button to stop the buzzer, the light still flashes since the
temperatur is reached.
4. Press either the “B“ or “D“ button. The temperature display switches over
and the DESIRED temperature currently set flashes on the temperature
display.
5. Set the required temperature by pressing the “B“ or “D“ buttons (see section
"Temperature setting buttons"). The temperature display will immediately
show the changed setting. Each time the button is pressed the temperature
is adjusted by 1 °C.
From a food safety point of view -18 °C should be considered sufficiently
cold for storing food in the freezer.
FROSTMATIC
The FROSTMATIC function accelerates the freezing of fresh food and, at the
same time, protects foodstuffs already stored from undesirable warming.
1. The FROSTMATIC function is switched on by pressing the FROSTMATIC
button. The yellow light illuminates.
If the FROSTMATIC function is not terminated manually, the appliance
electronics switch off the FROSTMATIC function after 52 hours. The yellow
light goes out.
2. The FROSTMATIC function can be terminated manually at any time by
pressing the FROSTMATIC button again. The yellow light goes out.
Alarm OFF button
In the event of an abnormal temperature rise inside the freezer (e.g. power
cut) warning light (G) will start to flash and a buzzer will sound.
After the temperature has returned to normal, the warning light (G) will
continue to flash, although the buzzer has stopped.
When the alarm button is pressed, the warmest temperature reached in the
compartment flashes on the indicator. (max. 5 seconds).
To stop the buzzer push the button “H”.