Filter
Top Products
OPERATING INSTRUCTIONS
Page 14 62.9696.01
4. No bleaching or chlorine-containing cleaning agents are to
be used for cleaning. Utensils are to be thoroughly rinsed with
water and dried after cleaning. The surfaces of appliances are
of corrosion resistant chrome nickel steel. They are to be
washed down with hot soapy water with the addition of a stan-
dard grease solvent. Avoid cleaning with steel brushes, steel
wool, copper scouring pads or cloths, products containing
sand, etc. as such media destroy the surfaces and create the
conditions for corrosion formation. Spraying appliances or
parts of appliances with a water jet or high pressure cleaning
equipment is harmful and can cause malfunction. This is there-
fore prohibited.
Note:
The type and concentration of solvents used for cleaning the
surfaces must comply with the code of the Federal Regulations
21 CFR Part 178.1010.