Filter
Top Products
37
Oven Door Glass
The oven door is fitted with two glass panels mounted one behind the
other. The inner panel can be removed for cleaning.
1 Caution: the following steps must be performed only with the oven
door removed! If the glass is removed while the door is attached, the
lighter weight may cause it to spring up and cause injury.
1 Important! Rough handling of the glass, especially at the edges of the
front panel, may cause it to break.
Removing the glass from the door
1. Detach the door and, with the han-
dle downwards, place it on a soft,
even surface.
2. Grasp the top glass panel under-
neath, and push it towards the door
handle against the pressure spring,
until it comes free (
á ).
3. Hold the panel gently underneath,
and slide it out (
à ).
Clean the glass panel
Inserting the glass to the door
1. Insert the panel at an angle from
above into the section of the door
in which the handle is located (
á ).
2. Lower the panel. Place the glass
against the pressure spring at the
handle end, and in front of the re-
taining frame at the bottom of the
door, then push it into the
frame (
à ).
The glass panel must be firmly attached!
Re-hang the door to the oven.