What to do if …64
What to do if …
If you are unable to remedy the problem by following the above sugges-
tions, please contact your dealer or the Customer Care Department.
Problem Possible cause Remedy
The oven does not heat
up
The oven has not been
switched on
Switch the oven on
The clock has not been set Set the current time on the
clock
The required settings have not
been set
Check the settings
The oven’s automatic cut-out
has been triggered.
See Automatic cut-out
The house wiring fuse (in the
fuse box) has tripped
Check fuse. If the fuses trip
several times, please call a
qualified electrician
The oven lighting is not
operating
The oven light bulb is faulty Replace oven bulb
The oven is not heating
up. Time is lit.
Demo mode is on. Keep Selection button
pressed for 2 seconds, then
within 2 seconds press and
hold Selection and
buttons for 2 seconds
F11 appears in the clock
display
The meat probe has short
circuited or the plug of the
meat probe is not firmly in po-
sition in the socket
Insert the plug of the meat
probe as far as it will go into
the socket on the side wall of
the oven
An error code not listed
above appears in the time
display
Fault in the electronics Switch off the appliance via
the house fuse or the safety
switch in the fuse box and
switch it on again.
If displayed again, please con-
tact the Customer Care De-
partment