Filter
Top Products
8
Operating Instructions
GETTING STARTED
To run your dishwasher, follow these basic steps:
1 Load dishwasher. (See Preparing and Loading Dishes, pages 13-16.)
2 Add detergent. (See Dishwasher Dispenser & Detergents, pages 17-18.)
3 Add rinse aid, if needed. (See Rinse Aid, page 19.)
4 Select desired CYCLE. (See Cycle Selections, page 9.)
The light surrounding the pad glows when selected.
5 Select desired OPTIONS. (See Energy Options Selections, page 10.)
The light surrounding the pad will glow when selected.
6 To start, press START/CANCEL pad and close door. (See Start/Cancel,
page11.)
NORMAL OPERATING SOUNDS
Your dishwasher uses energy efficient motors for the wash and drain portions of
the cycle you select. Each cycle has a series of water fills and drains for washing
and rinsing dishes. As each cycle begins, you may–or may not–hear the drain
motor. You may also hear the splashing water as it enters the tub and the spray
arms as they rotate and circulate water. The wash motor often pulsates throughout
the cycle, which varies water pressure and optimizes performance.
NONO
NONO
NO
TETE
TETE
TE
The dishwasher is programmed to remember your last cycle so you do not have to reset
each time. To start the dishwasher using the same cycle and options selected on the
previous wash, press the START/CANCEL pad.
NONO
NONO
NO
TETE
TETE
TE
The lights surrounding the pads will only glow when the door is open because the
dishwasher is designed to have the controls hidden under the countertop.
Cycle Selections
Option Selections Status Window Start/Cancel