Filter
Top Products
Operating Instructions
31
.... after switching off the cooking zones, neither j nor h for re-
sidual heat appears in the display?
Check whether
– the cooking zone was only used for a short period and is therefore
not hot enough.
If the cooking zone is hot, call AEG customer service.
.... a cooking zone cannot be switched off?
Check whether
– the touch fields are partially covered by a damp cloth or liquid.
– the lock is activated.
.... a cooking zone cannot be switched on?
Check whether
– the lock is activated.
.... f is shown in the display?
Check whether the cooking zone has been overheated.
This indicator lights up to show overheating, electronic faults or for
safety reasons. Contact your local Customer Service.
If you call in an engineer to resolve a problem caused by incorrect op-
eration of the appliance, the customer service engineer's visit will not
be free of charge, even during the warranty period.