Filter
Top Products
Charcoal filter
The charcoal filter should only be used if you
want to use the hood in the recirculation
function.
To do this you will need an original
ELECTROLUX charcoal filter (available from
your local Service Force Centre).
This filter cannot be cleaned or reused.
As a general rule, the activated charcoal
filter should be changed once every four
months.
Fitting Fig. 4
Fit one charcoal filter on the left and one on the
right so to cover the plastic grids that protect the
fan wheel, then turn clockwise the central
handle of the charcoal filter.
To remove proceed in the reverse order.
Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the
registration plate located on the inside of the
unit.
The charcoal filter can be ordered from your
local ELECTROLUX Service Force Centre.
Changing the light bulb
Disconnect the cooker hood from the main
supply.
Remove the lamp cover.
Replace the old bulb with a new one of the
same type.
Remount the lamp cover.
If the light does not come on, make sure the
bulb has been inserted in correctly before
contacting your local Service Force Centre.
Fig. 4
Fig. 5
Changing the light bulb -
only models EFC 9405-9414 -
6405-6414
Disconnect the cooker hood from the main
supply.
Remove the lamp cover, use a flat bladed screw
driver as a lever. Fig. 5.
Replace the old bulb with a new one of the
same type.
Refit the lamp cover.
If the light does not come on, make sure the
bulb has been inserted correctly before
contacting your local Service Force Centre.