Electrolux CHDD 8795 Ventilation Hood User Manual


 
62
Warning
Failure to observe the instructions on cleaning the unit and changing
the filters will cause a fire hazard. You are therefore strongly
recommended to follow these instructions.
The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.
Changing the light bulb
Disconnect the cooker hood from the
main supply.
Remove the lamp, use a screw driver
as a lever. Fig. 7.
Remove the connector.
Replace the old bulb with a new one
of the same type.
Refit the connector.
If the light does not come on, make
sure the bulb has been inserted
correctly before contacting your local
Service Force Centre.
Connector
Fig. 7