Filter
Top Products
CLEANING MATERIALS
Before using any cleaning materials on your oven,
check that they are suitable and that their use is
recommended by the manufacturer.
Cleaners that contain bleach should NOT be used
as they may dull the surface finishes. Harsh
abrasives and scourers should also be avoided as
damage will occur.
CLEANING THE OUTSIDE OF THE
OVEN
Regularly wipe over the control panel, oven doors
and handles using a soft cloth and hot soapy
water. To prevent streaking finish with a soft cloth.
Model D2160-1M only
Stainless steel cream cleaners can be abrasive
and should be avoided as damage to the surface
finish can occur. Washing up liquid and hot water
or liquid stainless steel cleaners such as Homecare
Stainless Steel Cleanser and Polish may be used
to remove fingermarks.
CLEANING THE GOLD HANDLES
(Model D2160-1G only)
It is strongly recommended that only hot water to
which a little washing up liquid has been added and
a soft cloth is used for cleaning the gold handles.
ANY OTHER CLEANING MATERIALS WILL DULL
THE GOLD PLATED FINISH.
REMOVING AND REPLACING
WIREWORK SIDE RUNNERS
Remove all shelves and furniture from the oven. If
fitted ensure the telescopic runners are pushed
back into place in the oven cavity. Hold the bottom
of the wirework runners and draw the runners
towards the centre of the oven. Unhook from the
top and remove.
The telescopic runners should be dried carefully
after washing in hot water to which washing up
liquid has been added. lf heavily soiled mild
abrasives may be used.
To replace the runners, hook the wirework side
runner into the cavity, slide back and press into
place.
24
CARE AND CLEANING
BEFORE CLEANING THE OVEN ALWAYS
ALLOW THE COOLING FAN TO COOL
THE OVEN DOWN BEFORE SWITCHING
OFF THE ELECTRICITY SUPPLY.
Do not attempt to remove any of the
control knobs from the panel as this may
cause damage and is a safety hazard.
Under no circumstances should the door
assembly be detached from the product
for cleaning. Please refer to the cleaning
instructions.
CAVITY CENTRE
BRACKET
Ensure the wirework runners are firmly
in position before replacing the oven
shelves.