Filter
Top Products
9
TO CANCEL THE COUNTDOWN
If you change your mind and want to
cancel the 'Countdown', press the Time
Selector button ( ) until the 'Countdown' indicator
neon ( ) flashes then depress the decrease control
( ) until 00.00 shows in the display as Fig. 5. The
'Countdown' indicator neon will continue to flash for a
few seconds and then return to the operating time.
3. SETTING THE OVEN TIMER CONTROL
When using the timer control for the very first time, it
is advisable to let it operate while you are at home.
The displays can be checked to show that it is
operating correctly and you will feel confident to
leave a meal to cook automatically in the future.
A) TO SET THE TIMER TO SWITCH ON
AND OFF AUTOMATICALLY
i) Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g.
9.a.m. as Fig. 6.
ii) Set the control to the required function and
temperature.
iii) Place food in the oven.
iv) To set the length of cooking time. Press the Time
Selector button ( ) until the 'Cook Time'
indicator neon ( ) is illuminated. Press the
increase control ( ) until the required length of
cooking time is displayed, e.g. 2 hrs 15 mins as
Fig. 7. If necessary depress the decrease control
( ) until the correct time interval is achieved.
The maximum cooking time is 9 hours 59
minutes.
v) Release the buttons. The 'Cook Time' indicator
neon ( ) will be illuminated.
Remember, this must be completed within 5
seconds of first pressing the Time Selector
Control button.
vi) To set the 'End Time'. Press the Time Selector
button ( ) until the 'End Time' indicator neon
( ) flashes. Press the increase control button
( ) until the required stop time is displayed, e.g.
12.15 p.m. as Fig. 8. If necessary depress the
decrease control ( ) until the correct time
interval is achieved.
vii) Release the buttons. The 'Cook Time' ( ) and
'End Time' ( ) indicator neons will be
illuminated. The 'End Time' must not be more
than 23 hours 59 minutes from the time of day.
For example, if the time of day is 09.00 a.m., the
latest 'End Time' would be 08.59 a.m. the next
day.
viii) The function and temperature selected will
remain in the display.
NOTE: When the automatic timed period starts,
the heat indicator will flash until the oven has
reached the desired temperature and then stop.
HEAT AND HOLD
This feature will keep food warm for up to 30 minutes
after the end time has elapsed. To activate heat and
hold press the selector control ( ) and then the
increase control ( ) directly after you have entered
the 'Endtime' ( ). and 00.30 will show in the
display as Fig.9.
Fig.5.
Fig.7.
Fig.8.
Fig.9.
Fig.6.