Filter
Top Products
65
Description of the Appliance
The cooker hood is designed to extract unpleasant odours
from the kitchen, it will not extract steam.
The hood is supplied as an extractor unit and can also be used with
a recirculation mode by fitting a charcoal filter.
You will need an original charcoal filter for this function (Available
from your local Service Force Centre).
Only for HI 8820: The cooker hood is
supplied ready for use as a recirculation
hood and may be used for extraction by
removing the charcoal filter which has
been fitted inside the cooker hood.
Extraction mode
In this mode fumes are extracted to the
outside via a hose connected to the
coupling ring A. Fig. 1.
In order to obtain the best performance
the hose should have a diameter equal
to the outlet hole.
Should there already be a pipe of
diameter 125 or 120 mm that ducts to
the outside through the walls, it is possible to use the 150/125-120
mm reduction flange provided. In this case the hood will be slightly
noisier.
Recirculation mode
The air is filtered
through a charcoal
filter and returned to
the kitchen.
You will need an
original charcoal
filter for the
recirculation mode.
(See Special
Accessories).
Fix the deflector
using 4 screws Ø
3.5x6.5 mm. Fig. 2.
Fig. 1
F
Fig. 2
A