Filter
Top Products
Counter-Depth French Door Refrigerator
Optional Collar Kit (ECK23CDS) Specifications
•
To use Collar Kit (PN# ECK23CDS), an enclosure is required around
Counter-Depth French Door Refrigerator having an opening of 70-1/4"H x
36-1/8"W with minimum cabinet side panels of 24-1/2"D x 1/2"W.
•
Minimum 24-1/2" depth requires recessed electrical outlet and water line.
•
Add maximum of 1/4" to 70-1/4" opening height when installed with
frameless-style overhead cabinets, for door opening clearance.
•
Cabinet or soffit above unit must extend out to same depth as
side panels.
•
To provide additional clearance for overhead cabinet doors when in open
position, allow 1" from underside of cabinet to bottom of cabinet door.
•
A minimum width of 36-1/8" is required for refrigerator installation with
an additional 1/2" or 3/4" added for each side panel.
•
If 1/2" side panels are used, then side trim piece and panel will be
even. If 3/4" side panels are used, then 1/4" of side panel will extend
beyond collar trim and must be finished.
•
For detailed Counter-Depth French Door Refrigerator installation, refer to
model-specific product page and installation guide on web.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
Collar Kit (ECK23CDS) Installation
E23BC78IPS, E23BC78ISS, E23BC68JPS, E23BC68JSS
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-877-4electrolux (1-877-435-3287)
•
electroluxicon.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
electroluxicon.ca
ECK23CDS INST_FDR 10/10 © 2010 Electrolux Home Products, Inc. Printed in the U.S.A.