Electrolux E23BC78IPS Refrigerator User Manual


 
French Door Refrigerator
E23BC78IPS professional series
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
250 Bobby Jones Expressway
Augusta, GA 30907
1-877-4electrolux (1-877-435-3287)
electroluxicon.com
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
1-800-265-8352
electroluxicon.ca
E23BC78IPS 09/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.
B
C
A
“Built-In Look” Cutout Dimensions
(A) 70
1
/4" (B) 36" (C) 25"
Top View
24"
Cabinet
25"
Countertop
Recessed
water line
Recessed
electrical outlet
25" Side Panels,
1
/2" min. width
Allow 1" min. clearance at rear
for proper air circulation and
water/electrical connections
Standard Depth
Standard
Refrigerator Depth
vs. Counter Depth
23
5
/8"
Counter Depth
28
1
/2"
68
3
/16"
with
3
/8"
rollers
26
7
/8"
35
5
/8"
69
1
/2"
with
3
/8"
rollers
Power
cord
location
(right
bottom
rear)
Water
line inlet
location
(left
bottom
rear)
4
7
/8"
42
9
/16"(with doors
90°open)
23
5
/8"
44
1
/2"
(with drawer
fully extended
including handle)
29
1
/2"
Counter-Depth French Door Refrigerator Specifications
Product Weight – 348 Lbs.
An electrical supply with grounded three-prong receptacle is required.The
power supply circuit must be installed in accordance with current edition
of National Electrical Code (NFPA 70) and local codes & ordinances.
Voltage Rating –120V/60Hz/15 or 20 Amps
Connected Load (kW Rating) @120 Volts = 1.02kW
Amps @120 Volts = 8.5 Amps
Always consult local and national electric & plumbing codes.
Floor should be level surface of hard material, capable of supporting fully
loaded refrigerator.
When installing refrigerator adjacent to wall, cabinet or other appliance
that extends beyond front edge of unit, 20" minimum clearance
recommended to allow for optimum 120° to 180° door swing, providing
complete drawer/crisper access and removal. (Absolute 4-1/2" minimum
clearance will ONLY allow for 90°door swing which will provide
drawer/crisper access with restricted removal.)
To ensure optimum performance, avoid installing in direct sunlight or
close proximity to range, dishwasher or other heat source.
For proper ventilation, front grille MUST remain unobstructed.
Recess electrical outlet when possible.
Water recess on rear wall recommended to prevent water line damage.
Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).
Copper tubing with 1/4" O.D. recommended for water supply line with
length equal to distance from rear of unit to household water supply line
plus 7 additional feet. Optional Water Supply Installation Kits available.
Adjustable front rollers to assist with door alignment.
“Built-In Look” Specifications
Minimum opening of 70-1/4"H x 36"W x 25"D required to allow for ease
of installation, proper air circulation, and plumbing/electrical connections.
Remove all wall/floor molding prior to installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.