Filter
Top Products
17
Storage Features
CANTILEVER SHELVES
You can easily adjust shelf positions in the freezer and fresh food compartments to
suit your needs. The shelves have mounting brackets, which attach to slotted
supports at the rear of each compartment.
To change the position of a shelf:
1 Before adjusting a shelf, remove all food.
2 Lift the front edge up.
3 Pull the shelf out.
4 Replace by inserting the mounting bracket hooks into the
desired support slots.
5 Lower the shelf and lock into position.
Shelf Features
Your refrigerator includes SpillSafe
TM
glass shelves, which are
designed to catch and hold accidental spills. These shelves
slide out for easy access to food and faster cleaning.
Sliding shelves can be pulled forward as far as their built-in
stops allow. Sliding shelves cannot be separated from their
mounting brackets.
!
CACA
CACA
CA
UTIONUTION
UTIONUTION
UTION
To avoid injury from breakage, handle tempered glass shelves carefully.
NONO
NONO
NO
TETE
TETE
TE
The Cantilever Sliding Glass Shelf has spacers (side screws) on
the sides of the brackets to securely hold the shelf in place.
To relocate the shelf to a different location, the spacers must be
turned in (clockwise). To secure the shelf in a new location,
remember to turn the spacers out (counterclockwise) until they
touch the sides of the compartment.
2
3
1
1
Tighten spacers
to remove shelf.
Loosen spacers
to stabilize shelf
against liner.
Cantilever Aspect
Glass Shelf