Electrolux E24CM75GSS Coffeemaker User Manual


 
14
Installation
INSTALLING THE CABINET GLIDES
The cabinet glides mount to the inside of the cabinet. The glides on the
coffee maker slide into the cabinet glides. The guide system allows the
coffee maker to slide in and out of the cabinet for loading the coffee bins
and for maintenance.
To install the cabinet glides:
Determine the number of metal shims required to mount the cabinet glide
assemblies according to the chart and diagrams below. The appliance
is supplied with six
1/16” (1mm) metal
shims. Use the shims
to position the fixing
angles so that they are
properly spaced. The
appliance will not slide
in and out of the cabinet
properly if the fixing angles are not properly spaced.
Cutout Width Number of Shims
22 1/8” (56.2cm) 0
22 3/16” (56.4cm)
2 Total (1 on each side)
22 1/4” (56.6cm) 4 Total (2 on each side)
22 3/8” (56.8cm) 6 Total (3 on each side)
22 1/8” (562mm) Min.
3/4” (19mm)
Min. Side Walls
4” X 12” (100mm X 300mm) Min.
Cabinet Back Cutout for
Air Circulation
Side Wall
Cabinet Base
Shim
Fixing Angle
Cabinet
Glide
Cabinet
Glide
Asssembly