Filter
Top Products
21
Getting Started
Removing and Replacing Oven
Racks
ALWAYS ARRANGE OVEN
RACKS WHEN THE OVEN IS COOL
(PRIOR TO OPERATING THE OVEN).
Always use oven mitts when using the oven.
To remove an oven rack, pull the rack
forward. Lift up the rack off the oven rack
glides. To install an oven rack, locate the
two pinholes in the small plates at the front
corners of the rack. Position the back of the
rack on the rack glides and drop the pin
holes over the pins on the rack glides.
Installing and Removing Oven
Rack Supports
ALWAYS INSTALL OVEN RACK
SUPPORT BEFORE TURNING ON THE
OVEN (WHEN THE OVEN IS COOL).
To install oven rack support, align and
insert the 2 rear tabs of the rack supports
to the rear holes in the oven side wall.
Then align the 2 front tabs of the rack
support to the front holes in the oven side
wall. Push in on rack supports to secure
in wall.
To remove the oven rack support for a
self-clean cycle, support and lift front
bottom of rack support to release front
tabs. Then, rotate rack support up and
out to release rear tabs. If the rack
supports are not removed, the self-clean
cycle won’t start.
Pull oven rack forward and lift it up off the
oven rack glides.
BEFORE SETTING OVEN CONTROLS
Figures 16-18
Figure 13
Figure 14
Figure 15