Built-In All Refrigerator
E32AR75GTT panel ready
High standards of quality at Electrolux Major Appliances mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
USA
•
250 Bobby Jones Expressway
•
Augusta, GA 30907
•
1-877-4electrolux (1-877-435-3287)
•
electroluxusa.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
electroluxca.com
E32AR75GTT 08/07 © 2007 Electrolux Major Appliances, NA Printed in the U.S.A.
Built-In Panel-Ready All-Refrigerator Specifications
•
Product Weight – approx. 253 Lbs. (without wood panel)
•
An electrical supply with grounded three-prong receptacle is required.
The power supply circuit must be installed in accordance with current
edition of National Electrical Code (NFPA 70) and local codes &
ordinances.
•
Voltage Rating – 115V/60 Hz/15 or 20 Amps
•
Connected Load (kW Rating) @115 Volts = 0.55kW
•
Amps @115 Volts = 5 Amps
•
Always consult local and/or national electric & plumbing codes.
•
Remove all wall/floor molding prior to built-in installation.
•
When possible, recess electrical outlet.
•
Water filter system for All-Freezer model E32AF75GTT ice maker is
located in All Refrigerator. For side-by-side installation, refer to web for
details on ice maker water supply hookup. If All-Freezer unit is to be
installed alone, direct plumbing recommended.
•
When installing next to wall where handle (not included) may make
contact, allow clearance for 90° door swing. At 90° door stop position,
drawer access will be maintained but removal will be restricted.
•
Refrigerator must be placed on level surface of hard material, same
height as flooring. Surface must support approximately 650 lbs. when
fully loaded. Unit equipped with 4-point leveling.
•
If optional Single or Double Louvered Trim Kit is to be used, different
cutout dimensions are required. (Refer to cutout dimensions on this
page and to Louvered Trim Kits Installation Specifications page.)
•
If optional Double Collar Kit is to be used, different cutout dimensions
are required. (Refer to Double Collar Kit DUOCOLLKIT Installation
Specifications page.)
Custom Door Panel Specifications
•
Panel Dimensions – 61-3/8"min.H x 32-9/32"W x 3/4"min.D
•
Panel Weight – 40 Lbs. max.
•
Refer to web for detailed custom panel construction and installation
instructions.
Note: Refer to Product Installation Guide for detailed instructions
on the web at electroluxusa.com.
Optional Accessories
•
Double Collar Kit – (DUOCOLLKIT).
•
Single Louvered Trim Kit – (SRRRSRKIT).
•
Double Louvered Trim Kit – (DUORSRKIT).
Built-In All Refrigerator
(with Louvered Trim Kit & Riser)
Single Unit Installation
(A) 79" (B) 33" (C) 25
1
/4" min.*
Double Unit
Side-by-Side Installation
(A) 79" (B) 66" (C) 25
1
/4" min.*
Cutout Dimensions
Built-In All Refrigerator
(without Trim Kit & Riser)
Single Unit Installation
(A) 66" (B) 33" (C) 25
1
/4" min.*
Double Unit
Side-by-Side Installation
(A) 66" (B) 66" (C) 25
1
/4" min.*
*Minimum depth from cabinet’s front face and requires recessed electrical outlet and water line.
Recessed electrical outlet
Top View
25"
Countertop
24"
Cabinet
3
/4"Custom Door Panel
Cabinet Side Panels
3
/4"min.
(with Louvered Trim Kit)
B
C
A
Louvered
Trim Kit
Custom
Door Panel
Specifications
Height: 61
3
/8"min.
Width: 32
9
/32"
Thickness:
3
/4"min.
Weight: 40 lbs. max.
(Handle not included)
Note: Refer to web
for detailed custom
panel construction
and installation
instructions.
21
/32"
(hinge height)
64
5
/8"
68
3
/4"
min.
69
3
/4"
max.*
Shown
with optional
4" trim kit
riser
Water line inlet location
(left top rear)
Power
cord
location
(right
bottom
rear)
26
3
/4" (not incl.
custom panel)
32"
24
1
/4"
29
5
/16" to handle
extension
Allow at
least 57
1
/4" with door in
90
°
open position
*Height
includes
cabinet plus
4" riser
(
21
/32" hinge
height not
included)
Note: Optional Louvered Trim Kits and optional Double Collar Kit
available for Built-In Panel-Ready All Refrigerator. For specifications
and drawings, refer to Louvered Trim Kits Installation or Double
Collar Kit (DUOCOLLKIT) Installation pages.