Filter
Top Products
Modular Cooking Range Line
900XP Gas Bratt Pan 100lt
with Duomat bottom
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
foodservice@electrolux.com
Modular Cooking Range Line
900XP Gas Bratt Pan 100lt with Duomat bottom
Modular Cooking Range Line
900XP Gas Bratt Pan 100lt with Duomat
bottom
391140 (E9BRGJDPF0) 900XP Gas Bratt Pan – 100
liter with Duomat bottom
Unit to be Electrolux 900XP Gas Bratt Pan 100 liter capacity. Suitable for
natural gas or LPG. Burners in chrome plated steel with flame failure device.
Unit shall have Duomat cooking surface for roasting, browning, stewing,
preparation of sauces, sautéing, boiling and braising.
Unit can be installed on cantilever systems. Unit shall include mechanism
to manually tilt the pan and double-skinned closing lid in stainless steel.
Cooking temperature can be set through thermostat and the energy input
through an energy regulator.
Exterior panels of unit in Stainless steel with Scotch Brite finish. Unit has
right-angled side edges to allow flush-fitting junction between units.
Main Features
• Bratt pan ideal for sautéing, poaching, steaming,
boiling, stewing and damp cooking.
• Duomat cooking surface allows to perform wet
and dry cooking alternatively.
• Double–skin well and lid to reduce heat dispersion.
• Lid is double-lined, insulated in 20/10 Stainless
steel.
• IPX5 water resistance certification.
• Actual cooking temperature setting through
adjustable thermostat.
• Working temperature can be set from 120 °C to
300 °C.
• Energy input controlled by energy regulator.
• Heat-insulated: limited heat radiation and low
energy consumption.
• Manual tilting mechanism to facilitate pan
emptying.
• Smooth large surfaces, easy access for cleaning.
• The special design of the control knob system
guarantees against water infiltration.
Construction
• Cooking surface with Duomat bottom: a 10 mm-thick
alloy obtained from the combination of 2 different
stainless steels for better thermal stability and
corrosion resistance.
• Burners in chrome plated steel with flame failure
device, optimized combustion and piezo ignition with
electronic flame control.
• All pan internal surfaces round and polished.
• All exterior panels in Stainless Steel with Scotch Brite
finishing.
• Model has right-angled side edges to allow flush fitting
joints between units, eliminating gaps and possible dirt
traps.
Optional Accessories
• Draught diverter, 150 mm diameter PNC 206132
❑
• Matching ring for flue condenser, 150
mm diameter
PNC 206133
❑
• Flanged feet kit PNC 206136
❑
• Pair of side kicking strips (not for refr-
freezer base)
PNC 206180
❑
• 2 panels for service duct for single
installation
PNC 206181
❑
• 2 panels for service duct for back to
back installation
PNC 206202
❑