Electrolux ECN 2757 Freezer User Manual


 
15
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
This appliance must be earthed.
The manufacturer declines any liability should these
safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance rating
plate.
The appliance is supplied with a 13amp plug fitted. In the
event of having to change the fuse in the plug supplied, a
13amp ASTA approved (BS1362) fuse must be
used.Should the plug need to be replaced for any reason.
The wires in the mains lead are coloured in accordance with
the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
The wire coloured green and yellow must be connected to
the terminal marked with the letter "E" or by the earth
symbol or coloured green and yellow.
The wire coloured blue must be connected to the terminal
"N" or coloured black.
The wire coloured brown must be connected to the terminal
marked "L" or coloured red.
Upon completion there must be no cut, or stray strands of
wire present and the cord clamp must be secure over the
outer sheath.
Electrical Connection
GREEN & YELLOW
BROWN
CORD CLAMP
BLUE
13A
P1041
E
N
L