Filter
Top Products
11
INSTALLING THE COOKER HOOD
Please ensure that when the appliance is
installed it is easily accessible to an engineer
in the event of a breakdown.
All installations must comply with the local
authorities requirements for the discharge
of exhaust air.
Incorrect installation may affect the safety
of this cooker hood.
Installation Requirements
Before installation check that the wall to
which the cooker hood is to be fitted for
electric cables, water pipes and gas.
This cooker hood is designed to be fixed to any
vertical surface over a cooking area, and can be
used in the extraction (ducted to the outside) or
recirculation mode.
The installation work must be undertaken by a
qualified and competent person.
The manufacturer disclaims any responsibility for
damage due to incorrect installation of the cooker
hood or if the hood is not installed in compliance
with relevant regulations controlling this type of
installation.
Unpacking
The cooker hood is supplied with the following
components for installation:
• Ducting spigot 150 to 120mm (A)
• Canopy (C)
• Ducting Collar (D)
• Lower chimney stack 530mm (I)
• Recirculation spigot (R)
• Upper chimney stack 215mm (S)
Fixing kit comprising:
• Wall fixing brackets (1 and 2).
• Document pack.
(Optional Splashback B)
2
1
A
R
S
I
C
B
D