Description of the appliance
The cooker hood is supplied ready for use as a
recirculation hood and may be used for
extraction by removing the charcoal filter
which have been fitted inside the cooker hood.
Extractor version
In this version fumes are extracted to the
outside via a hose connected to the coupling
ring. Fig. 1.
In order to obtain the best performance the hose
should have a diameter equal to the outlet hole.
Fig. 1
Recirculation Version
The air is filtered through charcoal filters and
returned to the kitchen. Fig. 2.
You will need original ELECTROLUX
charcoal filters for the recirculation function.
(Available from your local Service Force
Centre)
Fig. 2
Coupling ring
Hose*
* The hose is not supplied and must be
purchased separately.
Cabinet
Charcoal filters
Hose*
Cabinet
* The hose is not supplied and must be
purchased separately.
Control Panel
Best results are obtained by using a low speed
for normal conditions and a high speed when
odours are more concentrated.
Turn the hood on a few minutes before you start
cooking, you will then get an under pressure in
the kitchen. The hood should be left on after
cooking for about 15 minutes or until all the
odours have disappeared. The control switches
are located on the hoods front panel:
Correct ventilation
If the cooker hood is to work correctly there must
be an under pressure in the kitchen. It is important
to keep the kitchen windows closed and have a
window in an adjacent room open.
Light switch
Motor switch
Fig. 3