Filter
Top Products
electrolux electrolux
electrolux electrolux
electrolux installation
1919
1919
19
GB
Fitting the hood inside the cabinet
• Position the hood inside the cabinet,
by sliding its brackets over the
brackets fixed to the cabinet until the
stop limit is reached.
• Run the power supply cable through
the special slots in the cabinet.
• Secure the hood, using 2 screws
(one per side) to fix the brackets
together.
• If the hood is not perfectly in line with
the lower edge of the cabinets at the
side, its position can be adjusted by
means of the internal fixing screws
(see chapter "
Fixing the brackets toFixing the brackets to
Fixing the brackets toFixing the brackets to
Fixing the brackets to
the cooker hoodthe cooker hood
the cooker hoodthe cooker hood
the cooker hood" on the previous
page).
• Fit the connection flange to the
exhaust hose, which should have a
suitable length and diameter for
channelling fumes outside (Ducted
version), or to the top of the cabinet
(Filter version).
• Fix the connection flange to the
exhaust outlet of the hood (snap-
fastening).
When fastened correctly, the
indicator on the flange should be
aligned with the corresponding notch
in the exhaust outlet.
• Complete the connection at the other
end of the exhaust hose.
• Filter version only: Fit the charcoal
filter(s) (see chapter "
MaintenanceMaintenance
MaintenanceMaintenance
Maintenance
and Carand Car
and Carand Car
and Car
e - Chare - Char
e - Chare - Char
e - Char
coal filtercoal filter
coal filtercoal filter
coal filter").
• Fit the grease filter(s) (see chapter
"
Maintenance and CarMaintenance and Car
Maintenance and CarMaintenance and Car
Maintenance and Car
e - Metale - Metal
e - Metale - Metal
e - Metal
grgr
grgr
gr
ease filterease filter
ease filterease filter
ease filter").
• Connect the hood to the electricity
supply.
Ø
4 x 8
2x