Filter
Top Products
7
2
1
2
3
4
2
CLOSED
OPEN
Maintenance
Work light
The hood has two lamps 40 W (E 14 candle).
Switch on and off with the left slide switch.
Correct ventilation
To have the cooker hood working correctly the
windows in the kitchen should be closed. In stead a
window in an adjacent room should be open.
Important to know
If the hood is run at the same time as a burner or
fireplace that depend on ambient air (for example
gas, Diesel, coal or wood heaters, water heaters,
etc.) be careful, because the hood, when it exhausts
the air, removes the ambient air required by the
burner or fireplace for combustion.
Not valid if the cooker hood is used in
recirculation mode.
Before performing any maintenance
operation, disconnect the hood from
the electricity.
Grease filter
This serves to hold the grease particles in suspen-
sion.
Model EFT 625 is supplied with two grease filters,
model EFT 925 is supplied with one grease filter.
The metal filter should be washed every month
with warm soapy water or, if possible, in the
dishwasher (60°C).
Remove the filter:
l Open the latch and rotate the grid downwards
(Fig. 12).
l To remove, pull forward from the right hand
side and unhook.
l Release the clips B (Fig. 13).
Leave to dry before refitting it, be sure that the
grease filter/s cover the whole aspirating surface
before refitting.
Grid must be cleaned as well as the grease filter.
Carbon filter
This filter dissolves cooking odours.
It should be changed every 6-8 months in normal
use. Ask the technical assistance service or manu-
facturing company for a new one.
The carbon filter must never be washed.
To remove the carbon filter, push the hooks C and
pull the filter downwards (Fig. 9).
Fig. 11
Fig. 12
Fig. 13
1
2
3
B
A