Electrolux EFT 630 Ventilation Hood User Manual


 
33
Description of the Appliance
The hood is supplied as an extractor unit and
can also be used with a filtering function by
fitting one charcoal filter.
You will need an original Electrolux charcoal
filter for this function (Available from your
local Electrolux Service Force Centre).
ONLY for: EFT 630 W/GB / 942 120 776
EFT 630 B/GB / 942 120 777
EFT 635 X/GB / 942 120 779
The cooker hood is supplied ready for use
as a recirculation hood and may be used for
extraction by removing the charcoal filter
which has been fitted inside the cooker
hood.
Extractor version
In this version fumes are extracted to the
outside via a hose connected to the coupling
ring.
Attention: The hose is not supplied and must
be purchased separately.
In order to obtain the best performance the hose
should have a diameter equal to the outlet hole.
Recirculation Version
The air is filtered through a charcoal filter and
returned to the kitchen through the front grid.
Move the lever to position F.
You will need an original Electrolux charcoal
filter for this function (Available from your
local Electrolux Service Force Centre).
Fig. 1 - Extractor version
Fig. 2 - Recirculation version
To the outside
Hose
Coupling ring
(Bayonet and screw
fitting)
A
F
Charcoal Filter
Lever
Front grid