Filter
Top Products
installation instructions electrolux 55
Electrical connection/power supply
The oven must be connected to the
electricity supply by a designated elec-
trician.
Use a H05VV-F type power cable or
higher.
The appliance must be installed with a
socket supply line, otherwise the fixed
home electrical system must include an
isolating device with at least a 3mm-
contact separation to enable a simulta-
neous and all-pole cut off from the
mains, according to NIN 2000.
The customer must have a socket for
the electrical connection that is accessi-
ble and outside the co-ordination room.
A cable length of approx. 120 cm must
be provided with lines connected direct
to the mains.
1. Opening the terminal box (detail D).
2. Open the catch on the cord grip
(detail E).
3. See the connection diagram for the
terminal connection.
4. Secure the cord grip by pressing
firmly on the catch (detail F).
5. Closing the terminal box.
6. Fix the connection cable into the
holes provided to prevent it rubbing
against the drawer (detail G).
In case of repair the appliance must
be switched off from the mains.
Installation diagram 400V
Phase definitions:
L1, L2, L3 (or R, S,T)