Electrolux EI27EW45JS Double Oven User Manual


 
Double Wall Oven
EI27EW45JS
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
10200 David Taylor Drive
Charlotte, NC 28262
1-877-4electrolux (1-877-435-3287)
electroluxappliances.com
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
1-800-265-8352
electroluxappliances.ca
EI27EW45J 02/14 © 2014 Electrolux Home Products, Inc.
3" max.
Electrical
junction
box location
4" x 4"
opening
to route
armored
cable
27
1
/8"
min.
1
1
/2"
min.
11
1
/2"
suggested
distance
4
1
/2"
min.
required
48
7
/8"
min.
49
1
/8"
max.
Full base
required
to support
300 lbs.
2"-wide
wood spacers
(if needed)**
24
7
/8"min.
25
1
/4"max.
23
1
/2"min.*
(critical
dimension)
2" min.
48
5
/8"
24
5
/8"
Spacers
24
1
/2"
Power
supply
location
(left
bottom
rear)
50
7
/16"
(includes
1"bottom
trim)
1
15
/16"
27"
Allow at least
21" clearance
for door depth
when open
* Critical dimension – MUST be applied
**For cutout height between 49
1
/
8
" and 49
3
/
4
", add one 2"-wide wood
shim of appropriate height to each side of opening under oven side rails.
Lifting oven will hide larger cutout opening at top and oven’s 1"-high
bottom trim will hide shims at bottom.
(Optional 3"-high bottom trim
available for cutout height between 49
3
/
4
" and 51
1
/
2
".)
27" Electric Double Wall Oven Specifications
Product Weight – 300 Lbs.
Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit fused
on both sides of line.
Connected Load (kW Rating) @ 240 / 208 Volts = 7.1/5.4 kW
Amps @ 240/208 Volts = 29.6/25.7 Amps
Recommended Circuit Breaker – 40 Amps
Always consult local and national electric codes.
Minimum 21" clearance for oven door depth when open.
Suggested distance from floor is 11-1/2". Minimum required distance
is 4-1/2".
Minimum 23-1/2" deep cutout dimension is critical for proper installation,
to ensure that oven’s faceplate will fit flush against cabinet front.
To adapt oven to fit cutout height between 49-1/8" and 49-3/4", add
one 2"-wide wood shim of appropriate height to each side of opening
under oven side rails. Lifting oven will hide larger cutout opening at
top and oven’s 1"-high bottom trim will hide shims at bottom.
(Standard 1"-High Bottom Trim included.)
To adapt oven to fit cutout height between 49-3/4" and 51-1/2", optional
3"-High Bottom Trim available.
Full oven base of solid plywood or similar material required, capable of
supporting 300 Lbs.
Base must be level and cabinet front must be square.
Double Wall Ovens are NOT approved to be used in stackable or
side-by-side installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.
Optional Accessories
3"-High Bottom Trim: S – (PN # 903114-9020).