Electrolux EI30HI55KS Ventilation Hood User Manual


 
9
To install blower motor assembly, slide the left
mounting plate ange under the motor mounting
bracket.
Push the right end of the motor mounting plate
down and snap it into the spring tab.
NOTE: The spring tab should be outside the slot
in the mounting plate.
6.
7.
A
Align mounting holes and install 6 x 16 mm
bolts and 6.4 mm lock washers.
Attach power cord connector from the hood insert
to connector on wiring box.
Install 10” round ducting damper with 4 - 4.2 x 8
mm mounting screws.
Continue to Prepare the Location on page 12.
8.
9.
10.
11.
A.Motor mounting bracket
B.Mounting plate left ange
B
A
A. Motor mounting plate
B. Spring clip
A
B
A. Bolt with lock washer
B. Mounting hole
A
B
B
A
A. 10” round ducting damper
B. Installation screws
Blower Motor Systems Installation
A.Wiring connection
Dual Blower Motor Assembly
A
BB
A. Wiring Box Connector
B. Hood Insert Connector