Filter
Top Products
74 electrolux
3b)when converting from LPG to natural
gas unscrew about one-fourth turn by-
pass screw, until a regular small
flame is reached.
Reassemble the parts following the
same procedure backards.
Check that, turning quickly the knob
from the maximum position to the
minimum one, the flame does not go
out.
Replacement of gas oven
burner nozzle
To replace the gas oven nozzle, follow
this procedure:
1. Remove the bottom plate of the oven
cavity (“A”);
2. Undo the two fixing screws (“C”)
which keep the oven gas burner in
place
3. Gently slide the oven gas burner off
the injector support (“D”) and slowly
move it to the left hand side, taking
care not to cause stress to the spark
plug connection wire (“E”) and the
thermocouple (“F”) conductor;
3. With a socket spanner 7 unscrew and
remove the gas burner injector (“D”),
and replace it with the required one
(see "Burner characteristics");
4. Reassemble the burner following the
same procedure in reverse.
5. Replace the Gas Type Sticker (it is
located near the gas connection
ramp) with the one relevant to the new
gas type which is supplied with the
injector kit.