Filter
Top Products
14
OCCURRENCE
Oven Control Beeps and Displays any F
code (for example F11).
Installation.
Entire appliance does not operate.
POSSIBLE CAUSE/SOLUTION
Electronic control has detected a fault condition. Push CANCEL to clear the display and stop
the display from beeping. Reprogram the oven. If a fault reoccurs, record the fault number,
push the CANCEL pad and contact an authorized servicer.
Poor installation. Place a level on an oven rack in center of oven. Contact installing agent
if rack is not level.
Kitchen cabinet misalignment may make oven appear to be unlevel. Be sure cabinets are
square and level. Contact cabinet maker to correct problem.
Make sure cord/plug is securely plugged into electrical outlet.
Cord/plug is not installed or connected. Contact your dealer, installing agent or authorized
servicer.
Service wiring not complete. Contact your dealer, installing agent or authorized servicer.
Power outage. Check house lights to be sure. Contact your local electric company.
Short in cord/plug. Replace cord/plug.
Care & Cleaning
Before you call
Solutions to Common Problems