Filter
Top Products
Reversing the door
818 22 86-00/8 13
4. Remove the door fitting on the
lower right (1) and reposition the
door hinge bracket cover from the
lower left to the right of the door
(2), place the door fitting supplied
in the lower left of the door (3).
Carefully remove the door to the
front and place on one side.
5. Move the upper hinge bracket
pivot to the left.
6. Carefully slide the door onto the
top hinge bracket pivot and close.
7. Place the lower door hinge
bracket with the hinge bracket
pivot in the lower left of the door
and fasten.
8. Move the door handle from the
left to the right and cover the
remaining holes with the hole
cover pins attached.
9. Open the door and fit the plinth
cover.