Filter
Top Products
Rear spacers
Inside the appliance you find two
spacers which must be fitted as shown
in the figure.
Slacken the screws and insert the spacer
under the screw head, then retighten the
screws.
Removing the shelf holders
Your appliance is equipped with shelf retain-
ers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of
the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).
Installation of the Taste Guard Filter
The Taste Guard Filter is an active carbon fil-
ter which absorbs bad odours and permits
to maintain the best flavour and aroma for all
foodstuffs without risk of odour cross con-
tamination.
On delivery the carbon filter is in a plastic bag
to maintain it’s duration and characteristics.
The filter should be placed behind the flap
before the appliance is turned on.
1. Pull the flap outwards (1)
2. Remove the filter from the plastic bag
3. Insert the filter in the slot found in the back
of the flap cover (2)
4. Close the flap cover
2
1
Important! During operation, always keep
the air ventilation flap closed.
The filter should be handled carefully so frag-
ments do not loosen from the surface.
30 electrolux