Electrolux ENB 38607 W8 Freezer User Manual


 
electrolux 5
service agent or qualified service
personnel.
If the power plug socket is loose,
do not insert the power plug.
- There is a risk of electric shock or
fire.
Any electrical work required to install
this appliance should be carried out
by a qualified electrician or
competent person.
Parts which heat up should not be
exposed. Whenever possible, the
back of the appliance should be
close to a wall, but leaving the
required distance for ventilation, as
stated in the installation instructions.
The appliance should be left for 2
hours after installation before it is
turned on, in order to allow the
refrigerant to settle.
Child Safety
Do not allow children to tamper with
the controls or play with the product.
Keep packaging materials away from
children, to prevent the risk of
suffocation!
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
GB
IMPOR
IMPOR
T
T
ANT S
ANT S
AFET
AFET
Y INS
Y INS
TR
TR
UCTIONS
UCTIONS
These warnings are provided in the interests of your safety. Ensure that you
understand them all before installing or using this appliance. Your safety is of
paramount importance. If you are unsure about any of the meanings or these
warnings contact the Customer Care Department.
Prior to installation
Check the appliance for transport
damage. Under no circumstances
should a damaged appliance be
installed. In the event of damage
please contact your retailer.
Installation
This appliance is heavy. Care should
be taken when moving it.
It is dangerous to alter the
specifications or attempt to modify
this product in any way.
Ensure that the appliance does not
stand on the electrical supply cable.
If the supply cable is damaged, it
must be replaced by a cable
available from your local Service
Force Centre.
Make sure that the power plug
has not been squashed or
damaged during transit.
- A damaged power plug may
overheat and cause a fire.
As you unpack the appliance,
check carefully for any signs of
transit damage.
Do not place heavy articles or the
fridge/freezer itself on the power
cord.
- There is a risk of a short circuit and
fire.
Do not remove the power cord by
pulling on its lead, particularly
when the fridge/freezer is being
pulled out of its niche.
- Damage to the cord may cause a
short-circuit, fire and/or electric
shock.
- If the power cord is damaged, it
must be replaced by a certified