14 electrolux
Hold down the control button for 1sec to
turn ON the system / device.
Set the type of beverage and start the
cooling with the control button on the
device user interface (UI).
If you push the button once then the LED
on the DrinksExpress display lights up to
the first beverage type (Type A).
If you push it once again within the next 3
seconds then the vessel Type B will be
preselected. Continuing pressing it and
you will move on the next Type of vessel
until you arrive at the last Type (Type F).
Pressing on more time and you will turn
off the unit.
Once you have selected the type of
vessel, following the previous guidelines,
just leave the unit as it is (LED blinking),
and after 3 seconds it will initiate the
cooling automatically.
Immediately you will see on the external
display on top of the refrigerator an icon
being activated (bottle icon as on the
figure below).
GB
Activating icons for DrinksExpress function on the
topdisplay
Once the cooling cycle is finished, you
will receive an acoustic signal as the
bottle icon on the external display is
blinking.
This acoustic signal will be repeated
every 10 seconds during a period of 30
minutes after which the DrinksExpress
unit will automatically switch off. You can
manually deactivate the acoustic signal
and switch off the DrinksExpress unit by
pressing the control button.
Vessel capacity of the DrinksExpress
unit:
Inside DrinksExpress unit you can chill
down up to:
8 cans of 0.33 cl or 0.5 cl
4 PET bottles of 0.5 cl
2 wine bottles 0.75 lt
a 2lt Tetrapak
a 1.5 lt PET bottle or even a Magnum
bottle
The DrinksExpress device in
stand-by mode
In stand-by mode this specific
compartment is a refrigerated zone that
can be used as extension of the fresh
food compartment for storing food or
beverages.
The temperature inside the
DrinksExpress device when not in use
is at the same level as the crisper bin
beside.
Cleaning the device
DrinksExpress device is easy to clean
because it has a flat surface inside that
can be easily cleaned with a damp
cloth.
A removable plate on the bottom
collects any possible drink spillage and
condensation water: it can be removed
for cleaning even under hot water (but it
is not recommended to put it into a
dishwasher).