Filter
Top Products
electrolux 15
GB
External components:
7. Dispenser
8. Water Lever
9. Water drop tray
INITIAL OPERATIONS TO USE YOUR
WATER DISPENSER
1. Remove every tape and other
protection system from the tank
assembly;
2. Clean the components as described
in the WATER DISPENSER CLEANING
PROCEDURE section in order to
remove eventual residues;
WATER DISPENSER CLEANING
PROCEDURE
1. Unblock the two stopping elements
on the sides of the tank as shown in the
pictures;
- Take out the BRITA MAXTRA cartridge
from the water filter unit
- Press the retainer in the middle and
move it up.
- Move the retainer into direction of the
central tank
2. Push up the tank along the direction
of the Valve
3. Remove the lid and the funnel
4. Unscrew the valve in a counter
clockwise direction (pay particular
attention not to lose the Valve Gasket).
5. Clean the tank lid, the valve and the
gasket with a solution of warm water
and neutral soap. Rinse it and put it
inside the door hole during the cleaning
of the other components (in order to
avoid cold air leakage from the fridge);
6. Clean the tank and funnel in the
dishwasher or with a solution of warm
water and neutral soap and rinse them;
7. After cleaning the tank components
remove the valve from the fridge door
and assemble the tank in the reverse
order (4;3;2;1) of disassembly (pay
attention to the positioning of the valve
gasket)
8. Put the assembled tank on the door
along the valve direction;
9. Replace the retainers in the reverse
order of removal;