Filter
Top Products
17
B) To Set The Timer To Switch Off Only
i) Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g.
10.00 a.m. as Fig. 9.
ii) Place food in oven.
iii) To set the length of cooking time, press the
cooking hours button ( ) while holding it down,
turn the increase control ( + ) until the required
length of cooking time is displayed, e.g. 2 hrs 15
mins as Fig. 10. Turn the decrease control ( - )
if necessary .
iv) Release the buttons. The Cooking Symbol and
the AUTO symbol will glow and the time of day
will be displayed.
v) Set the oven temperature.
vi) To check the stop time during the cooking
period, simply press the stop time button ( )
and the stop time will be displayed, as Fig. 11.
4. To Return the Appliance To Manual After An
Automatic Programme
To return the appliance to manual operation after an
automatic programme, follow the steps given below.
At the end of a timed cooking period, the AUTO
symbol will flash and a bleeper will sound for up to 2
minutes. This can be stopped by pressing any of
the buttons as Fig. 12.
Turn oven control to the OFF position. The AUTO
symbol will continue to flash.
Press( ) button. The AUTO symbol will go out as
Fig. 13.
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13