Filter
Top Products
Building in
16
Instructions for totally built-in
appliance
Dimensions of the recess
Height of housing 880 mm
Depth of housing 550 mm
Width of housing 560 mm
For appropriate venting, follow indications in the
figure.
Push the appliance into the housing until stop strip
(A) touches the kitchen unit.
If after having carried out the operation described in
section 2 there is still some space left between the
appliance and the kitchen unit, fit the trimming
provided together with the appliance on the stop strip
(A).
Open the door and push the appliance against the
side of kitchen furniture opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the
kit included with the appliance. Snap vent grille (C)
and hnge cover (D) into position.
The appliance’s door has been locked in position
for transport by means of pins on both sides.
According to the door opening direction, remove
relevant pins at the top and at the bottom.