Filter
Top Products
Door Reversal
1. Disconnect it from the electricity supply.
2. Remove all loose items, including food. Store
food in a cool place.
3. Make sure a towel or cloth is at the base of
the product to prevent it from slipping.
4. Carefully lean the appliance backwards,
resting the top on a stool, or something
similar, at least 30cm (12") from the floor.
(care must be taken not to allow the appliance
wheels to slip).
Do not support the appliance on the rear
ventilation grille or condenser.
5. Remove level adjuster (A) from base of
product retaining small cup spacer which is
located around the threaded portion of the
adjuster.
6. Remove the foot / hinge assembly (B) by
removing screws marked (C).
7. Remove the bottom door by lifting it upwards
slightly and carefully sliding it down off the
centre hinge pin (H).
8. Remove blanking plate (M) using a flat blade
screwdriver.
9. Remove the centre hinge (H) by loosening
screw (G) and removing totally screw (J).
Remove the top door by carefully sliding it
down off the upper hinge pin (P).
10. Unscrew the upper hinge pin (P) and transfer
it to the opposite side of the cabinet.
11. Refit blanking plate (M) onto the opposite side
of the cabinet.
20