Filter
Top Products
electrolux
21
• Remove the ventilation grill (D).
• Using a 10 mm spanner, unscrew
the hinge pin (E) and reassemble it
on the opposite side of the hinge;
• Screw down the bottom hinge (E)
on the opposite side by using the
screws previously removed.
• Remove the plug (F) from the
ventilation grill (D) and replace it on
the opposite side.
• Re-assemble the ventilation grill (D).
• Reinsert the door .
• Pay attention that the front board of
the doors are parallel to the front
board of the top.
• Fix the door stopper on the
opposite side (4).
• Position and fix the upper hinge on
the opposite side (1-2)
1
4
3
2
F
F
D
F
F
E
E
• Reinsert the 2 plastic hinge covers (3).
• Lift up the appliance to vertical
position.
• Open the door and reposition the
upper door plastic trim with screws.
• Fix the handles on the opposite
side, insert the plastic plugs into
the holes left open that can be
found in the instruction for use bag.
Reposition, level the appliance,
wait for at least two hours and
then connect it to the power socket.
In any case you do not want to carry
out the above mentioned operations,
contact the nearest After Sales Service
Force. The After Sales Service
specialist will carry out the reversibility
of the doors at your cost.
Warning
After hhaving rreversed tthe oopening
direction oof tthe ddoors ccheck tthat aall tthe
screws aare pproperly ttightened aand tthat
the mmagnetic sseal aadheres tto tthe ccabinet.
If tthe aambient ttemperature iis ccold ((i.e.
in WWinter), tthe ggasket mmay nnot ffit
perfectly tto tthe ccabinet. IIn tthat ccase,
wait ffor tthe nnatural ffitting oof tthe ggasket
or aaccelerate tthis pprocess bby hheating
up tthe ppart iinvolved wwith aa nnormal
hairdrier.