Filter
Top Products
18
electrolux
Shelf holders
Your appliance is equipped with shelf
retainers that make it possible to
secure the shelves during transportation.
To remove them proceed as follows:
Move the shelf holders in the direction
of the arrow, raise the shelf from the
rear and push it forward until it is freed
and remove the retainers.
A
C
B
Connect the Green and Yellow (earth)
wire to the terminal in the plug which is
marked with the letter «E» or the earth
symbol or coloured green and
yellow.
Connect the blue (neutral) wire to the
terminal in the plug which is marked
with the letter «N» or coloured black.
Connect the brown (live) wire to the
terminal in the plug which is marked
with the letter «L» or coloured red.
The plug moulded onto the lead
incorporates a fuse. For replacement,
use a 13amp BSI362 fuse. Only ASTA
or BSI approved fuses should be used.
The plug must not be used if the fuse
cover/carrier is lost. The cover/carrier
is indicated by the coloured insert at
the base of the plug.
A replacement cover/carrier must be
obtained from your local Electrolux
Service Force Centre.
This aappliance ccomplies wwith tthe
E.E.C. DDirective NNo. 887/308 oof 22.6.87
relative tto rradio iinterference
suppression.
D207
GREEN & YELLOW
13 AMP. FUSE
BROWN
CORD CLAMP
BLUE
13 AMP
This appliance complies with the
following E.E.C. Directives:
-
73/23 EEEC oof 119.2.73
(Low Voltage
Directive) and subsequent
modifications;
-
89/336 EEEC oof 33.5.89
(Electromagnetic Compatibility
Directive) and subsequent
modifications.
Please eensure tthat wwhen tthe aappliance
is iinstalled iit iis eeasily aaccessible ffor tthe
engineer iin tthe eevent oof aa bbreakdown.