Filter
Top Products
21
Before the refrigerator is taken into use
in its final location, ensure that the
water connection has been correctly
carried out, that there is no leakage at
the connection to the water tap, and
that the four spacers are properly in
position, see the illustration.
We recommend that the appliance is
placed on a "run-off" mat intended for
refrigerators and freezers, which
makes it easier to detect possible
leakage.
Electrical cord
Do not remove the power cord by
pulling on its lead, particulary when the
product is being pulled out of its niche.
· Damage to the cord may cause a
short-circuit, fire and/or electric shock.
· In the event of damage to the
appliance's main cable, only an
authorised service company
recommended by the manufacturer or
a similarly qualified person may adjust
it in order to avoid shock hazard for the
user.
Installation of carbon filter
On delivery the carbon filter is placed
in a plastic bag to secure the length of
the carbon filter life. The filter should
be placed behind the grill before the
cabinet is turned on.
The cover can be opened by
simultaneously pressing the lever on
the right of the grill (1) and turning the
cover outward (2). The carbon filter is
then mounted in the slot found in the
back of the cover.
The filter should be handled carefully
so fragments do not loosen from the
surface.
1
2
3
Installing the cabinet
When two appliances are placed
beside each other, the spacers
enclosed in the plastic wrapping
should be glued between the
appliances. As shown in the
illustration.