Filter
Top Products
4
Electrolux 8183823-00/7
Control Panel (water dispenser)
H
I
M
L
N
J
K
H. Yellow indicator lamp
Lights up when the locking function has been
activated.
I. Button for carbonated water.
- Used for the choice of carbonated water.
- For the engagement and disengagement of the
locking function.
J. Button for ordinary water.
- Used for the choice of ordinary water.
- Switches the background lighting on and off.
- Switches off the indicator lamp for water filter
replacement.
K. Yellow indicator lamp
Lights up when the water filter must be changed.
L. Water out-feed
Activated when a glass or something similar i s
pressed upwards against the flap.
M. Flap
N. Lighting
Before use
·Remove all securing tapes.
·Wash the inside of the appliance with lukewarm
water with a little bicarbonate of soda added (5ml to
0.5 litre of water). Do not use soap or detergent as
the smell may linger. Dry the appliance thoroughly.
Do not use detergents, abrasive powders,
highly perfumed cleaning products, wax,
polishes or products containing alcohol.
Check that the drain hose is located over the drip
bowl behind the refrigerator. Also ensure that the
drain hose is connected to the box. See the
illustration.
·Before inserting the power plug into the socket and
switching on the appliance for the first time, leave it
standing upright for about 30 minutes, or for 2 hours
if it was transported horizontally. Otherwise the com-
pressor may sustain damage. This time will allow the
oil sufficient time to return to the compressor.
Using the fridge
To start the fridge and thermostat control
Switching on:
Switch on the fridge by pressing the power switch.
Setting the temperature
Press the buttons until the desired temperature
flashes in the temperature display (The temperature
can be set between +2°C and +8°C.)
"+" raises the temperature.
"-" lowers the temperature.
Once set, the temperature display shows "-" until the
temperature inside the fridge reaches +9°C or below.
Allow the appliance to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
appliance.
ACTION
COOL
5
ACTION
COOL
5