Filter
Top Products
19
PR168
Hb
10. Place the small square on the guide again and fix
it with the screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots. At the end
of operations, it is necessary to check if the door
of the furniture closes properly.
11. Fix cover (Hd) on the small square (Hb) until it
clips into place.
PR167
Ha
8mm
K
PR167/1
Hd
Hb
9. Remove the brackets and mark a distance of
8 mm from the outer edge of the door where the
nail must be fitted (K).