Electrolux ESL 46510 Dishwasher User Manual


 
1 On/off button
2 Display
3 Delay button
4 Programme button (down)
5 Programme button (up)
6 Energy saver button
7 Multitab button
8 Reset button
9 Indicators
Indicators
1)
Salt indicator. It comes on when it is necessary to fill the salt container.
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
1)
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens-
er.
End indicator. It comes on when the washing programme is completed.
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
On/off button
Press this button to activate or deactivate
the appliance.
After ten minutes from the end of the wash-
ing programme, the Auto Off function auto-
matically deactivates the appliance. This
helps to decrease energy consumption.
Display
The display shows:
The electronic adjustment of the level of
the water softener
The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
The number of the washing programme
The remaining time to the end of the
washing programme
The end of a washing programme (the
display shows a zero)
The time of the delay start
The alarm codes
The activation and deactivation of the
acoustic signals.
Programme buttons
Press one of these buttons again and again
to set a washing programme. Each time
you press a button, the display shows a
number that is related to a washing pro-
gramme. Refer to 'Washing programmes'.
Energy saver button
This function decreases the temperature in
the drying phase. The power consumption
decreases by 25%.
The dishes can be wet at the end of the
programme when you open the appliance
door. We recommend that you keep the
door ajar and let the dishes dry.
Press this button to activate the function.
The related indicator comes on.
Multitab button
Press this button to activate or deactivate
the multitab function. Refer to 'Multitab
function'.
Reset button
Press this button to cancel a washing pro-
gramme in operation
Setting mode
The appliance must be in setting mode
for these operations:
To set and start a washing programme.
To set and start a delay start.
To adjust electronically the level of the
water softener.
To activate or deactivate the rinse aid
dispenser (only with the multitab function
on).
To deactivate or activate the acoustic
signals.
6 electrolux