Filter
Top Products
pliance and to the right to lower the appli-
ance.
Door reversibility
To change the opening direction of the
door, do these steps:
1. Remove the plug from the power sock-
et.
2. Remove the ventilation grille. Remove
the filling and install it on the opposite
side of the grille.
3. Lay down the appliance back side down
on a wooden support.
4. Unscrew the upper hinge (a1) and the
cover washer (a2) and install this on the
opposite side.
a1 a2
5. Unscrew the lower hinge (C1). Move the
pin to the opposite side (C2).
Unscrew and move the pedal to the op-
posite side (C3).
Screw on the lower hinge on the oppo-
site side.
C2
C3
C1
6. Tighten the pin with the adjustment
spanner supplied.
7. Raise the appliance and install the venti-
lation grille.
8. Unscrew the handle. On the opposite
side remove the hole covers by driving a
3-4 mm drift or drill into them. Install the
handle.
Install the hole covers provided within
the accessory bag.
9. Put the cabinet in position.
Warning! Reposition, level the
appliance, wait for at least four hours
and then connect it to the power
socket.
Do a final check to make sure that:
• All screws are tightened.
electrolux 11