Filter
Top Products
Induction Hybrid Cooktops
EW30CC55G S, EW30CC55G W, EW30CC55G B
High standards of quality at Electrolux Major Appliances mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
USA
•
250 Bobby Jones Expressway
•
Augusta, GA 30907
•
1-877-4electrolux (1-877-435-3287)
•
electroluxappliances.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
electroluxappliances.ca
EW30CC55G 01/08 © 2008 Electrolux Major Appliances, NA Printed in the U.S.A.
30"
13"
max.
cabinet
depth
6" min.
25"min.
7
1
/2" min. to nearest
combustible wall
(either side of unit)
10"
12"
2" min. recommended
distance between rear
edge of cutout and
nearest combustible
surface above countertop
20
3
/8" min.
20
1
/2" max.
Approximate location
of junction box
29
3
/4" min.
30" max.
4"x 8" opening to
route armoured cable
24"
2
1
/2" min. from
edge of cutout to front
edge of countertop
18"
min.
30" min.
for
unprotected
cabinet
24" min.
for
protected
surface
C
L
30
3
/4"
21
1
/2"
28
1
/2"
19
1
/16"
Overall depth
at center of
arc – 21
3
/4"
5
1
/4"
3
/4"
2
5
/8"
30" Induction Hybrid Drop-In Cooktop Specifications
•
Product Weight – 54 Lbs.
•
Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz,
fused on both sides of line with ground.
•
Connected Load (kW Rating) @ 240/208 Volts = 8.1/7.1kW
•
Amps @ 240/208 Volts = 33.8/34.1 Amps
•
Recommended Circuit Breaker – 40 Amps
•
Always consult local and/or national electric codes.
•
Allow 2"space below armoured cable opening to clear electrical cable
and allow space for installation of junction box on wall at back of cooktop.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Allow 30" minimum clearance between top of cooktop and bottom of
unprotected wood or metal overhead cabinetry.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than maximum width
of appliance.
•
Allow 24" minimum clearance when bottom of wood or metal overhead
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No. 28 MGS sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
•
Allow 2" minimum clearance between rear edge of cutout and nearest
combustible surface above countertop.
•
Allow 7-1/2" minimum clearance from edge of cooktop to nearest
combustible wall on either side of unit.
•
It is recommended that drawers not be used beneath cooktop.
•
To reduce risk of fire when using overhead cabinetry, install range hood
that projects horizontally a recommended minimum of 5" beyond bottom
of cabinets.
•
Induction Hybrid Drop-In Cooktop model EW30CC55G is approved to be
used over any Electrolux Single Wall Oven.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.