Electrolux EW3LGF65GS Range User Manual


 
Gas Freestanding Ranges
EW3LGF65G S, EW3LGF65G W, EW3LGF65G B
High standards of quality at Electrolux Major Appliances mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
USA
250 Bobby Jones Expressway
Augusta, GA 30907
1-877-4electrolux (1-877-435-3287)
electroluxappliances.com
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
1-800-265-8352
electroluxappliances.ca
EW3LGF65G 01/08 © 2008 Electrolux Major Appliances, NA Printed in the U.S.A.
Side
Overall depth
including oven
door in 90°open
position – 47"
28
5
/8"
26
3
/8"
Front
35
7
/8"
Adjustable
to
36
1
/8"
29
7
/8"
11
5
/8"
47
1
/2"
30"min.
13 "
max.
25"
24"
5"min.
to nearest
combustible
wall (either
side of unit)
above 36"
height
30
1
/8"
2"
15"
11
1
/2"
Area allows for flush
installation with through-
the-floor connection
of pipe stub/shutoff valve
Area allows for flush
installation with through-
the-wall connection of
pipe stub/shutoff valve
and rear wall 120V outlet
C
L
10
1
/2"
7"
23"
18"min.
36"
stand.
34"
min.
Gas
connection
and power
supply
location
(right bottom
rear)
30" Gas Freestanding Range Specifications
Product Weight – 260 Lbs.
Voltage Rating –120V/60Hz/15 Amps
Connected Load (kW Rating) @120 Volts = 1.8kW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
Amps @120 Volts = 15 Amps
Always consult local and/or national electric and gas codes.
Range ships with 3/4" factory regulator.
Range is Lp only and cannot be converted to natural gas.
Overhead cabinetry should not exceed a 13" maximum depth.
Allow 30" minimum clearance between top of rangetop and bottom of
unprotected wood or metal overhead cabinetry.
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than maximum width
of appliance.
Allow 24" minimum clearance when bottom of wood or metal overhead
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No.28 MGS sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
Allow 5" minimum clearance from edge of rangetop to nearest
combustible wall on either side of unit.
To reduce risk of fire when using overhead cabinetry, install range hood
that projects horizontally a recommended minimum of 5" beyond bottom
of cabinets.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.
Optional Accessories
Wok Ring – (318254307).
Simmer Plate – (318254206).